8 Inch Center Brass Deck Mount Pre Rinse Commercial Faucet for Restaurant Sink with Spray
Product Information
CUTEDAI Pre-Rinse Units Made for Commercial Cleaning Applications And Committed to every detail
Hot And Cold Deck Mount Pre-rinse Faucet will revolutionize the way you use your kitchen faucet
| Material: | Brass | Overall Height: | 47" 1193mm |
| Function: | Cold & Hot | Body Base: | Adjustable Center from 7 5/8” to 8 3/16”(198mm-208mm), Double Holes |
| Body Mount: | Deck Mount | Flexible Hose: | 37" (960mm) |
| Cartridge-Spindle: | Brass compression cartridge | Spray Valve Flow: | 1.42GPM (5.38LPM) |
| Inlet Thread | G1/2 ”Male | Handle: | Lever |
| Spring: | 304SS Spring to protect hose batter | Wall Bracket: | 12” SS wall bracket can be cut |
| Temperature Max: | 140 F (60℃) | Temperature Min: | 40 F (4.44℃) |
Product Description
1. The pre rinse faucet is equipped with brass high-pressure spray valve and EPDM & 304 stainless steel movable hose, which can quickly clean dish dirt
2. The stainless steel outer shell of the hose reduces tension and wear on the inner hose, extending its life
3. The bottom of the faucet is integrated to effectively eliminate the possibility of leakage
4. The tap is made of 59-1 national standard copper, good antibacterial property, good for health
5. Easy to install, Disassembly & Maintaince,each set of faucets comes with instructions, which can achieve quick installation within 5 minutes
6. 8 inch deck-mounted faucet base, eccentric nut design, can be installed with a center distance of 198mm-208mm
7. 47" height faucet is convenient for work and can easily clean any corner of the sink
8. pre rinse mixer is equipped with 1/2" NPT female eccentric flanged nut and G1/2" supply nipple kit
9. The brass compression cartridge,with spring check valve to prevent backflow and reduce maintenance costs，which can be replaced flexibly, it can be automatically adjusted and easily replaced, and it is wear-resistant with spring check valve to prevent backflow and reduce maintenance costs
10. The spray valve adopts low flow design, which is of great significance to water saving
11. There are built-in water sealing washers at the interface of each part of the faucet,no PTFE tape required
12. The length of wall bracket can be cutted to suit a variety of installation environments
Key Points of Professional Commercial Faucets Manufacturer
Packing Info
Inner Packing: 1pc in 1 inner box with EPE foam(box size:68.5*36*8.5cm)
Outer Packing: 3pcs in one carton(carton size:68.5*36.5*24.5cm)
If you need special customized packaging, please contact us.
Product Acessories