Product Information
ZBSLORE Pre-Rinse Units Made for Commercial Cleaning Applications And Committed to every detail
Single Cold Deck Mount Pre-rinse Faucet will revolutionize the way you use your kitchen faucet
Material: | Brass | Overall Height: | 47" 1193mm |
Function: | Cold | Body Base: | Single Hole |
Body Mount: | Deck Mount | Hole Size: | 25mm |
Flexible Hose: | 37" (960mm) | Inlet Thread: | G1/2” Male |
Cartridge: | Brass Compression Cartridge with spring check valve | Spray Valve Flow: | 1.42GPM (5.38LPM) |
Spring: | 304SS Spring to protect hose batter | Wall Bracket: | 12” SS wall bracket can be cut |
Temperature Max: | 140 F (60℃) | Temperature Min: | 40 F (4.44℃) |
Product Description
1. The pre rinse faucet is equipped with brass high-pressure spray valve and EPDM & 304 stainless steel movable hose, which can quickly clean dish dirt
2. The stainless steel outer shell of the hose reduces tension and wear on the inner hose, extending its life
3. The bottom of the faucet is integrated to effectively eliminate the possibility of leakage
4. The tap is made of low-lead copper, good antibacterial property, good for health
5. Easy to install, Disassembly & Maintaince,each set of faucets comes with instructions, which can achieve quick installation within 5 minutes
6. Single hole deck-mounted faucet base,the hole size of faucet is 25mm
7. 47" height pre rinse unit is convenient for work and can easily clean any corner of the sink
8. The brass compression cartridge with spring check valve to prevent backflow and reduce maintenance costs,which can be replaced flexibly, it can be automatically adjusted and easily replaced, the switch can reach 500,000 times, and it is wear-resistant
9. The spray valve of pre rinse adopts low flow design, which is of great significance to water saving
10. There are built-in O-ring washers at the interface of each part of the faucet,no PTFE tape required
11. The length of wall bracket can be cut to suit a variety of installation environments
Key Points of Professional Commercial Faucets Manufacturer
Packing Info
Inner Packing: 1pc in 1 inner box with EPE foam(box size:68.5*36*8.5cm)
Outer Packing: 3pcs in one carton(carton size:68.5*36.5*24.5cm)
If you need special customized packaging, please contact us.
Product Acessories