Wholesale Mini Pre-Rinse Faucet With 8" Wall Mount Faucet Base And 12" Swing Add-On Tap
Product Information
ZBSLORE Pre-Rinse Units Made for Commercial Cleaning Applications And Committed to every detail
Hot And Cold Wall Mount Pre-rinse Faucet will revolutionize the way you use your kitchen faucet
| Material: | Brass | Overall Height: | 23" (600mm) |
| Function: | Cold & Hot | Body Base: | Adjustable Center from 7 5/8” to 8 3/16”(198mm-208mm),Double Holes |
| Body Mount: | Wall Mount | Flexible Hose: | 17" (450mm) |
| Cartridge-Spindle: | Brass compression cartridge with spring check valve | Spray Valve Flow: | 1.42GPM (5.38LPM) |
| Nozzle: | Add-On faucet with 360°Swivel Nozzle | Nozzle Flow: | 5.57GPM(21.08LPM) |
| Inlet Thread | 1/2” NPSM Male or 1/2” NPT | Handle: | Lever, w/color coded indexes |
| Spring: | 304SS Spring to protect hose batter | Wall Bracket: | 8” SS wall bracket can be cut |
| Temperature Max: | 140 F (60℃) | Temperature Min: | 40 F (4.44℃) |
Product Description
1. The pre rinse faucet is equipped with brass high-pressure spray valve and flexible hose.The faucet spray valve has an output of 1.42 gallons per minute,which can quickly clean dish dirt. And the hose is 17 inches (45cm) long and constructed from stainless steel and EPDM.The stainless steel outer shell of the hose reduces tension and wear on the inner hose, extending its life.
2. The bottom of the faucet body is integrated to effectively eliminate the possibility of leakage
3. The tap is made of 59-1 national standard copper, good antibacterial property, good for health
4. Easy to install, Disassembly & Maintaince,each set of faucets comes with instructions, which can achieve quick installation within 5 minutes
5. 8”(214mm) swing faucet, 360°swivel, suitable for compartment sinks.
6. 8 inch wall-mounted faucet base, eccentric nut design, can be installed with a center distance of 198mm-208mm
7. 27" height faucet is convenient for work and can easily clean any corner of the sink
8. Commercial faucet is equipped with 1/2"NPT connector and 1/2"NPSM eccentric flange internal thread water inlet connector
9. The brass compression cartridge can be replaced flexibly, it can be automatically adjusted and easily replaced, the switch can reach 500,000 times, and it is wear-resistant with spring check valve to prevent backflow and reduce maintenance costs
10. The sprayer adopts low flow design, which is of great significance to water saving.
11. There are built-in water sealing washers at the interface of each part of the faucet,no PTFE tape required
12. The length of wall bracket can be cutted to suit a variety of installation environments
Key Points of Professional Commercial Faucets Manufacturer
Packing Info
Inner Packing: 1pc in 1 inner box with EPE foam(box size:68.5*36*8.5cm)
Outer Packing: 3pcs in one carton(carton size:68.5*36.5*24.5cm)
If you need special customized packaging, please contact us.
Product Acessories
