Zbslore - High-quality household and commercial faucet and hardware OEM&ODM service manufactory

Custom Design Brass Deck Mount Pre Rinse Mixer With Spray Valve 1

Custom Design Brass Deck Mount Pre Rinse Mixer With Spray Valve 2

Custom Design Brass Deck Mount Pre Rinse Mixer With Spray Valve 3

Custom Design Brass Deck Mount Pre Rinse Mixer With Spray Valve 4

Custom Design Brass Deck Mount Pre Rinse Mixer With Spray Valve 5

Custom Design Brass Deck Mount Pre Rinse Mixer With Spray Valve 6

Custom Design Brass Deck Mount Pre Rinse Mixer With Spray Valve 7

Custom Design Brass Deck Mount Pre Rinse Mixer With Spray Valve

7" deck mount pre-rinse unit with polished chrome plated brass body 17" flexible stainless steel & EPDM hose w/ heat resistant black handle, 1.45 GPM spray valve,brass compression cartridges with spring checks, lever handles w/ color coded indexes , 1/2" NPT female eccentric inlets, supply nipple kit,spray valve hold down ring, SUS304 overhead spring, and 12” wall bracket.

Model:

ZBS-M5804B-3P

Certifications:

WATERMARK/CE

Application:

Commercial kitchens,restaurants, hotels, supermarkets, hospitals, dishwashers, sinks and other commercial kitchen equipment, etc.

Features:

100% in-house production;Pre-assembled and easy to install;59-1 brass,safe and high quality

Inquiry

Write a Review

Product Information

ZBSLORE Pre-Rinse Units Made for Commercial Cleaning Applications And Committed to every detail

Hot And Cold Deck Mount Pre-rinse Faucet will revolutionize the way you use your kitchen faucet

Material:	Brass	Overall Height:	25" 642mm
Function:	Cold & Hot	Body Base:	Adjustable Center from 6 3/4” to 7 3/16”(172mm-182mm), Double Holes
Body Mount:	Deck Mount	Flexible Hose:	17" (450mm)
Hole Size:	26mm
Cartridge:	Brass compression cartridge with spring check valve	Spray Valve Flow:	1.42GPM (5.38LPM)
Inlet Thread	G1/2 ”Male	Handle:	Lever, w/color coded indexes
Spring:	304SS Spring to protect hose batter	Wall Bracket:	12” SS wall bracketcan be cut
Temperature Max:	140 F (60℃)	Temperature Min:	40 F (4.44℃)

Product Description

1. The pre rinse faucet is equipped with brass high-pressure spray valve and EPDM & 304 stainless steel movable hose, which can quickly clean dish dirt

2. The stainless steel outer shell of the hose reduces tension and wear on the inner hose, extending its life

3. The bottom of the faucet is integrated to effectively eliminate the possibility of leakage

4. The tap is made of 59-1 national standard copper, good antibacterial property, good for health

5. Easy to install, Disassembly & Maintaince,each set of faucets comes with instructions, which can achieve quick installation within 5 minutes

6. deck-mounted faucet base, eccentric nut design, can be installed with a center distance of 172mm-182mm

7. 25" height faucet is convenient for work and can easily clean any corner of the sink

8. pre rinse mixer is equipped with 1/2" NPT female eccentric flanged inlet and G1/2" supply nipple kit

9. The brass compression cartridge,with spring check valve to prevent backflow and reduce maintenance costs，which can be replaced flexibly, it can be automatically adjusted and easily replaced, the switch can reach 500,000 times, and it is wear-resistant with spring check valve to prevent backflow and reduce maintenance costs

10. The spray valve adopts low flow design, which is of great significance to water saving

11. There are built-in water sealing washers at the interface of each part of the faucet,no PTFE tape required

12. The length of wall bracket can be cutted to suit a variety of installation environments